Quality PFC-5 Cotton Fabric Phenolic Wear Rings Added With MoS2 wholesale mechanical seals

Type Wear Rings
Application Static sealing, oscillating sealing
Supply Ability 10000
Payment Terms TT , LC , Others
Tags:

Detail

Color: Grey
Impact Strength: 24 J/m
Temperature: -40° to 130° C, -40° to 266° F

PFC-5 Cotton Fabric Phenolic Wear Rings Added With MoS2

Wear rings perform the task of locating the piston and piston rod in the cylinder, absorbing any side loads that arise and preventing metallic contact between the sliding parts. Non-metallic materials are becoming increasingly popular as substitutes for the conventional metallic guides, offering a range of advantages that traditional solutions are unable to match.

PFC-5 Material Structure: 

Phenolic resin +cotton fabric+ MoS2

PFC-5 high-strength composite material is composed of high quality cotton fabric, soluble phenolic resin and MOS2 and processed under certain temperature and pressure. It is capable for oilless or low-oil conditions, thus can apply to engineering machinery, shipbuilding, hydroelectric

generation and so on.

PFC-5 Material Advantages:

good mechanical strength 

excellent wear resistance and heat resistance

absorbing semi-static high shock loading and slight rotate loading

PFC-5 Material Technical Parameters:


Part Number PFC-5 Test Method
Color Grey /
Density 1.2-1.4g/cm³
0.043-0.051lb/in³
DIN 53476
Tensile Strength 45MPa
6525PSI
ISO 527
Ultimate Compressive Strength 330MPa
47850PSI
ISO 604
Impact Strength 24 J/m /
Rockwell Hardness 90HRM ASTM D-229
Coefficient of friction 0.15-0.30(Dry)
0.07-0.11(Oil)
ASTM D 1894
Temperature -40° to 130° C
-40° to 266° F



Wear Cut Styles:


Advantages
Angle cut rings improve bearing stress at the gap. These rings tend to suit reciprocating movement.
Straight Cut, also known as Butt Cut rings are the easiest style to install in many applications. Straight cut rings are best suited for rotary movement.
Step cut rings also improve bearing stress at the gap. However, they offer better resistance to contaminants and spike loads. This type of design offers the best level of performance.

Typical application:

 Engineering Machinery Guide Rings, Bushings, Shaft Sleeves

 Water Conservancy Machinery Bearings

 Hydraulic Machinery, Forging Machinery Tool Guide Bushings

 Marine Bearings


Standard Size Sheet, additional sizes are available upon request.

Download PDF: PFC-5 Cotton Fabric Phenolic Wear Rings Added With MoS2.pdf

Product Recommendation

Send a message to us